image not found ARCVS Technology - One stop Glass Industry solution.

Founder Members

Mr. Vinod Kumar Turki

picture of vinod

    Mr. Vinod is one of the founding directors of ARCVS Technology and has more than 26 years of experience in the industry. Previously was working with Mulia glass / Pony international Jakarta as Project advisor.

    Before joining Muliglass / Pony international Jakarta, in 2007, he was Section head of engineering and improvement for Asahi India Glass (13 years).

    In 1993 started carrier as maintenance and operation engineer for Sanghi Oxygen (Bhavnagar- 1 year).

    He has a professional Diploma in Mechanical engineering, also a degree in BSc. Electronics.

    He has hand-on experience of the float as well as container plant cold repair, hot repair projects. He has worked on Greenfield, Brownfield projects of float glass, container glass, rolled glass, architectural glass plants, and floor tile projects.

Anjana Vinod Turki

Picture and name of First Associate

    Anjana Vinod Turki is a founding Director at ARCVS Technology. She has an Electronics & Telecommunication Engineering diploma and has experience of sales for electrical HT & LT panels. Latter had worked with Zenith computers in the Computer assembly line as cluster head. She has also worked with ICICI bank, The New India Assurance Company as well.

    She has a blend of technical to finance experience which is highly required for the business operations. She foresees the challenges ahead for the glass industry & wishes to extend her support to serve glass industry.

Advisory Panel



    Mr. Larry has more than 44 years of experience in the glass industry. From 1970 until 1980 he was with Owens-Illinois, Inc., starting in the maintenance department of a large glass container factory and finishing his Owens-Illinois career as a control systems project engineer for their Corporate Technology division.
    From 1980 until 1986 Mr. Larry was employed as a control systems engineering manager for the Bechtel Corporation, for a synthetic fuels project in New Zealand and a nuclear power plant project in the USA.

    In 1986 he joined International Technologies Consultants, Ltd. as their project manager. He managed several projects including the design of the Euroglass plant in Homburg, France. Later he was responsible for the design and construction of the P.T. Muliaglass float line #1 in Cikarang, Indonesia.

    In 1994 Mr. Larry joined P.T. Muliaglass to become the project manager and later project director two float glass plants, three container glass plants, and automotive safety glass plant and a 44 mega-watt power generation plant. He was also responsible for the subsequent cold repairs of these plants.

    Mr. Larry was a founding director of Pony Technologies, Ltd., and Shanghai Pony Technology, Ltd., working concurrently with P.T. Muliaglass and the Pony companies until 2020. During this time he was responsible for more than 20 project around the world.


picture of chuck

    Mr.Chuck is a seasoned and well-known consultant in the Float Glass industry. Chuck has experience as an advisor, consultant in operations with over 50 years in Float Glass manufacturing. Before start consultancy, he was a hot end manager in PT. Mulia Glass for 8 years. He started his carreer in the glass field 1970 With Guardian Float Glass USA and rose to hot end manager (1970 – 1991- 21 years) . He has been instrumental in Training and running new float players.
    He has vast experience in the troubleshooting process, training, shutdowns, heat-ups, etc. Major groups, he has either worked as a manager or had been appointed as a consultant on their projects, list of few major (out of 21) companies are listed below.

      Guardian Industries U.S.A.
      Fives Stein – France and Belgium
      Stewart Engineers & Associates, Inc USA
      PT Mulia Glass Indonesia
      Iran Float Glass Iran
      Farun Float China
      Shenzhen Float China
      Fuyao Float Glass China
      Salavatsteklo Float Glass Russia
      Obeikan Float Glass - Suadi Arabia

Mr. William G. P:

picture of BILL

    Mr. William commonly referred to as Bill, has extensive experience in the glass industry in the areas of design, construction and operations. His career in glass started in 1972 at TECO/USA. Spanning 23 years at TECO, Bill rose from his engineering duties to become one of the prime directors of this company. During his time at TECO he was involved in over 100 projects in the float, rolled/pattern, container, and fiber glass industries.
    Moving forward from TECO, Mr. Bill established himself as a leading world consultant in the field of glass making. Some companies that have retained his service since 1995 and include;

      PT Muliaglass (Indonesia)
      Fuyao Float Glass Company (China)
      Arabian United Float Glass Company, AUFGC (Saudi Arabia)
      Kaveh Glass Industry Group (Iran and Syria)
      Khawaja Flat Glass Industries (Pakistan)
      Saratovstroysteklo, SSS (Russia)
      Arcya Glass Corporation (Philippines)
      National Glass Manufacturing Complex (Turkmenistan)
      Shanghai Pony Technology Co., Ltd., SPT (China)
      VHG (Vietnam)
      Pony Technologies (Indonesia)


Picture and name of First Associate

    Mr. Milind having spent, more than 32 years in the field of glass & its application, he is well versed with all aspect of Glass production & business. He started his carrier as a mechanical engineer & rose to Managing Director. He leads a Greenfield container glass business in India, for MNC, from scratch & established it as quality & cost driver in a tough market.

    He was also head of the Solar Glass business for a short duration. He brings with him details know-how not only about glass but also about glass business. He has vast International exposure & connection if his field. He foresees the challenges ahead for the glass industry & wishes to extend his support.

What ARCVS Offer?

  • Project management,consultancy, planning, vendor selection,etc.

  • Consultancy for Cold Repair, Hot Repair, Estimation of furnace life for Solar Glass,Float Glass, Container Glass, Tableware Glass, Rolled Glass, Cold Top Furnace.

  • Computational Fluid Dynamics (CFD) for furnaces.

    The glass Melting & Process Improvement course for the glass industry

  • Selection of Refractory for all Types of Glass , Cement, Steel, Carbon Black, Paper and Pulp,etc. industry

  • Refractory inspection, with inspection experience of over 10 years

  • Fire hydrant system, Water sprinkler system, FDA/PA system Fm -200 system Fire Extinguisher Supply, Fire System Audit

Address: 202, Residency Apartment, Plot 62, Sector 2A, Kopar kherna Navi Mumbai, Maharashtra India, 400709. Contact No +919821021980, Email Id: &